Part 2: Configure Rapid Spanning Tree PVST+ Load Balancing Verify that the switches are correctly configured by pinging between them. S3(config-if-range)# switchport trunk native vlan 99 Step 6: Configure the management interface on all three switches with an address. S3(config-if-range)# switchport mode trunk S2(config-if-range)# switchport trunk native vlan 99 S2(config-if-range)# switchport mode trunk S1(config-if-range)# switchport trunk native vlan 99 S1(config-if-range)# switchport mode trunk Use the appropriate command to configure ports F0/1 to F0/4 on each switch as trunk ports and assign these trunk ports to native VLAN 99.

Step 5: Assign the trunks to native VLAN 99. Use the show vlan brief command on all switches to verify that all VLANs are registered in the VLAN table. S2(config-if)# switchport access vlan 20 Step 4: Verify the VLANs. Save your configurations after assigning switch ports to the VLANs. Port assignments are listed in the table at the beginning of the activity. S3(config-vlan)# vlan 99 Step 3: Assign VLANs to switch ports. Using the appropriate command, create VLANs 10, 20, 30, 40, 50, 60, 70, 80, and 99 on all of the switches. S2(config-fi-range)# no shutdown Step 2: Create VLANs. S2(config-if-range)# switchport mode access These three ports will be configured for access mode and enabled with the no shutdown command. Refer to the topology diagram to determine which switch ports on S2 are activated for end-user device access. Part 1: Configure VLANs Step 1: Enable the user ports on S2 in access mode. You will also optimize the network by configuring PortFast, and BPDU Guard on edge ports.

In this activity, you will configure VLANs and trunks, Rapid Spanning Tree PVST+, primary and secondary root bridges, and examine the configuration results. Part 3: Configure PortFast and BPDU Guard Background Part 2: Configure Rapid Spanning Tree PVST+ Load balancing Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Packet Tracer – Configuring Rapid PVST+ (Instructor Version)

Packet tracer labs spanning tree